CNC Shield V3 Bundle with 4 pieces A4988 Steppera drivers Stepper with heat sink for 3D printer compatible with Arduino

Select quantity discount: 1x Shield
Sale price£13.00

Tax included

✔️ The most modern CNC Shield version 3.0. Size: 68 x 53 x 18mm.
✔️ GRBL 0.9 compatible. Open source firmware that converts G-code commands to stepper signals.
✔️ 4-axis support (X,Y,Z A - Can duplicate X,Y,Z or run a full 4th axis with custom firmware using pins D12 and D13).
✔️ Stepper motors can be connected with 4-pin Molex connectors or soldered in.

Important downloads and links


This AZ-Delivery Shield is perfect to build a CNC machine!

But you can also use it for other mechanical projects where you want to control up to four stepper motors.

The A4988 stepper motor drivers have to be plugged on the shield. When plugging in the A4988 drivers, pay attention to the pinout. The enable pin is marked with EN on the board. The board can be operated with GRBL open source (G-code control) software.

If you want to run the stepper motors with microsteps, you still need 3 jumpers per axis to set 1/16 steps.

✔️ Size: 68 x 53 x 18mm

Welcome to the AZDelivery family!

Here you will find high quality products for your projects with Raspberry Pi. We are glad to offer you a set of application examples, complete installation guides, e-books, libraries and personal support.

AZ-Delivery: Your microelectronics expert!

You might also like this

Kürzlich angesehen