Description
This ESP32 USB C was designed by Espressif to enable easy entry into the programming of the new ESP32 dual core processor. The make! this module rightly referred to as "egg -laying wool milk sow". With a variety of new sensors and functions, this board represents the next step in IoT development. As with the previous model ESP8266, WLAN functionality is implemented directly into the SOC, but with an additional Bluetooth function (incl. BLE). The ESP32 processor used combines a CPU with 2 tensilica-lx6 cores in a single microcontroller chip, clocked with up to 240 MHz, and 512 kilobyte SRAM. To do this, he integrates a radio unit for WLAN (after 802.11bgn) and Bluetooth (Classic and LE). The WLAN function supports all common encryption methods such as WPA2. In addition, it can also act as an access point in WLAN or as a sniffer in passive mode. The 32 pins provide UART, I2C, SPI, DAC, ADC (12 bit) and all GPIO pins can be used as an input or output. With your order at AZ-Delivery Get a product in the usual high quality and with quick delivery directly from Germany at a discount price! For further ideas and projects, also visit our blog on the Internet or download our free eBooks on our website! AZ-Delivery: Your expert in microelectronics! At AZ-Delivery If it is a brand that is entered at the DPMA (German brand and patent office). According to Section 14 (2) MarkenG, it is prohibited from using this brand in business traffic.
Product description
The AZ-Delivery ESP32 DEV KIT C V4 with USB-C connection combines a CPU with two tensilica-lx6 cores in a single microcontroller, clocked with up to 240 MHz, and 512 kilobytes of SRAM. To do this, he integrates a radio unit for WLAN (after 802.11b/g/n) and Bluetooth (Classic and LE). The ESP32-Wroom-32 replaced in order to achieve a significant increase in transmission and reception quality without increasing performance.
With the new board layout, both the energy supply and the Reset circuit for automatic programming were significantly improved. Our dev-kit is equipped with the ESP32-D0WD-V3.
Technical data
- Power supply voltage (USB): 5 V
- Input/output voltage: 3.3 V
- required operating current: min. 500 mA
- SOC: ESP32S
- clock frequency range: 80 MHz / 240 MHz
- RAM: 512 KB
- External flash memory: 4 MB
- I/O pins: 34
- Interfaces: SPI, I2C, I2S, can, uart
- Wi-Fi Protocols: 802.11 B/G/N (802.11n up to 150 Mbps)
- Wi -fi frequency: 2.4 GHz - 2.5 GHz
- Bluetooth: V4.2 - BL and Classic Bluetooth
- Wireless antenna: PCB
- Dimensions: 56 x 28 x 13 mm
WLAN function
The WLAN function supports all common encryption methods, such as WPA2. The board can also act as an access point or sniffer in the WLAN. Interfaces such as Uart, I2C, SPI, DAC and ADC (12 bit) are available over 32 GPIO pins. All GPIO pins can be used as an input or output.
Digital and GPIO pins
Welcome to the AZDelivery-Family! With your order at AZ-Delivery Get a product in the usual high quality. Here you will find high-quality products for your projects with Raspberry PI. We offer you numerous application examples, complete installation instructions, e-books, libraries and personal support.